| Wreckers | |
| HDUL 350 Retriever | |
| Jerr-dan's heavy-duty Retriever Series include all of the world class features found on all Jerr-Dan heavy-duty wreckers including corrosion resistent aluminum/composite bodies, weatherproof electrical systems, 3-stage under lifts and more. Jerr-Dan retrievers are the right choice for towers and private truck fleets requiring professional towing equipment designed to haul incapacitated truck and tractor/trailer combinations. |
|
| Standard Equipment | |
| Independent Three Stage Underlift | |
| Lifting
Rating - Retracted: 35,000 lbs. Extended: 16,000 lbs. Precision Power Tilt & Fold Power Tilt: Positive Up 30°, Negative Down 10° Reach Centerline Rearmost Axle to Centerline Fork: 169" Hydraulic Extension: 63.75" Alloy Tie Down Chains Five Sets Underlift Tools One Set Spring Lift Attachments |
|
| Lighting | |
| Aerodynamic
Light Pylon Control Station Illumination FMVSS Lighting |
|
| Hydraulic System | |
| Variable
Flow Control Hydraulic Valves Hydraulic Reservoir w/Internal Screens, Sight Gauge, Fluid Cut-Offs & Clean-Out Provisions System Pressure: 3500 psi Tandem Hydraulic Pump |
|
| Controls | |
| Remote
Pendant Plug-in Controls All Underlift Functions Passenger Side Variable Speed Hydraulic Controls Nine Function Switch Panel Air Shift PTO Dual Hydraulic Pressure Gauges (passenger side) |
|
| Modular Composite Body | |
| 86"
CT Composite/Aluminum Body Independently Rubber Shock Mounted Built-in Tool Storage & Chain Racks Seven Recovery Anchors, Each Side One Vertical Compartment, Two Horizontal Compartments per Side. |
|
| Other | |
| Recessed
Glad Hand Connections. Recessed Seven-Pin Electrical Connector. Alloy Steel Safety Chains w/ Storage Pockets. Mudflaps. Dual Hydraulic Pressure Gauges (passenger side). Back-up Alarm. |
|
Click
Here To View |
|
| Heavy Duty |
 |
| HDUL 350 Retriever |
| Specifications |
|
A.
Centerline of Rear Axle to Tailboard: 39" Tow Rating: 80,000 lbs. |
| Recommended Chassis Requirements |
Minimum Cab-to-Axle 174" RBM Each Frame Rail 2,250,000 in./lbs. Minimum Chassis Requirements (Cab-to-Axle) Front Axle Minimum GAWR: 12,000 lbs. Rear Axle Minimum GAWR: 38,000 lbs. |
| The
load carrying capacity of any truck is determined by the GVWR of the
truck cab/chassis. It is important that you determine your truck has
satisfactory carrying capacity and axle ratings for your specific
application. Worldwide's authorized sales representatives are available
to assist you in this regard. Specifications shown are subject to
change without prior notification and some equipment shown may be
optional. Please consult your factory authorized Jerr-Dan distributor
to verify equipment specifications.
The tow rating of your recovery equipment is limited to the actual GVWR (Gross Vehicle Weight Rating) of your recovery vehicle, or the capacity of the equipment being used. For example, the GVWR of your recovery vehicle should not be exceeded by the GCW (Gross Combined Weight) of both towing and towed vehicles. This is the actual weight of the towing vehicle plus the towed vehicle(s) including: payload, driver, passenger(s) and fuel. (Everything that moves with your recovery vehicle.) However, if the towed vehicle has independent braking activated from the towing vehicle, the combined weight towed, will be the weight of the towing vehicle plus the lifted weight of the towed vehicle, which combined should not exceed the GVWR or the GAWR of the rear axle of the towing vehicle, or the capacity of the equipment used. |