Wreckers  
   
HDL 1200/530 60Ton Independent
   

The HDL 1200/530 60 Ton Independent is built tough to handle the biggest towing and recovery jobs you'll ever face. Lightweight, corrosion-resistant composite-bonded body panels provide a lasting quality finish, and weathertight storage compartments and weatherproof electricals assure long life. An extra-long underlift reach and no-torque boom ensure performance that will get you the jobs your competition can't touch.
   
Standard Equipment
 
Independent Recovery Boom
Lifting Rating - Retracted @ 30°: 120,000 lbs.
Extended @ 30°: 44,000 lbs.
Maximum Reach Extended @ 0 °: 176".
Maximum Working Angle: 50°.
Minimum Working Angle: 0°.
Maximum Hook Height: 370" (may vary with chassis).
 
Independent Three Stage Underlift
Lifting Rating - Retracted: 53,000 lbs.
Extended: 17,000 lbs.
Precision Power Tilt & Fold.
Power Tilt: Positive Up 30°, Negative Down 15°.
Reach Centerline Rearmost Axle to Centerline Fork: 137".
Hydraulic Extension: 70".
Alloy Tie Down Chains.
Five Sets Underlift Tools.
One Set Spring Lift Attachments.
 
Dual Winch
Power Cable Tensioners.
Dual Two Speed Planetary Winches (capacity each winch): 50,000 lbs..
Air Shift Winch Free Spool.
Cable/Wire Rope—6x37 Steel; IWRC: 3/4" dia.x250'.
 
Lighting
Control Station Illumination.
FMVSS Lighting.
 
Rear Spades
Hydraulic Rear Stabilizers with Integral. Recovery Anchors.
 
Hydraulic System
Variable Flow Control Hydraulic Valves.
Tandem Hydraulic Pump- System Overload Protection.
Hydraulic Reservoir w/Internal Screens, Sight Gauge, Fluid Cut-Offs &
Clean-Out Provisions.
System Pressure: 3000 psi.
 
Controls
18 Function Remote Controls All Wrecker & Underlift Functions.
Passenger Side Variable Speed Hydraulic Controls.
Nine Function Switch Panel.
Air Shift PTO.
Dual Hydraulic Pressure Gauges (passenger side).
 
Modular Composite Body
170" CT Aluminum Sub-Structure w/Composite Panel Independently Rubber Shock Mounted.
Built-in Tool Storage & Chain Racks.
Eight Recovery Anchors, Each Side.
Stainless Steel Paddle Latches, Door Hinges.
Forward Tool Compartments with Inside Tool Brackets.
Door Tensioners.
One Vertical Compartment, Three Horizontal Compartments per Side..
One Vertical Stand-Alone Compartments (170" CT Base Body.)
 
Other
Recessed Glad Hand Connections.
Recessed Seven-Pin Electrical Connector.
Alloy Steel Safety Chains w/ Storage Pockets.
Mudflaps.
Dual Hydraulic Pressure Gauges (passenger side).
Back-up Alarm.
 
 
 
Click Here To View
   
   
   
   
Heavy Duty
 
HDL 1200/530 60Ton Independent
Lift Rating - Retracted: 120,000 lbs.
Extended: 44,000 lbs.
Maximum Reach Extended @ 0 °: 176"
Independent Boom Working Angle: Min .0°, Max. 50°
Maximum Hook Height: 370" (may vary with chassis)

 

 
 Specifications
 

 

A. Centerline of Rear Axle to Tailboard: 39"

530 Underlift
B. Tailboard to Centerline of Fork: 55 " 53,000 lbs.
E. Tailboard to Centerline of Fork: 137" 17,000 lbs.

565 Coach Boom
B. Tailboard to Centerline of Fork: 60.5 " 56,500 lbs.
C. Tailboard to Centerline of Fork: 67" 53,000 lbs.
D. Tailboard to Centerline of Fork: 102" 36,600 lbs.
F. Tailboard to Centerline of Fork: 173 " 17,600 lbs.

Tow Rating: 80,000 lbs.
 
Recommended Chassis Requirements
.
Minimum GVW Rating
64,000 lbs. Recommended 84,000 Lbs.

Minimum Cab-to-Axle
174"

RBM Each Frame Rail
4,200,000 in./lbs.

Minimum Chassis Requirements (Cab-to-Axle)
Front Axle Minimum GAWR: 18,000-20,000 lbs.
Rear (Tandem) Axle Minimum GAWR: 46,000 lbs.
Third Axle Minimum GAWR: 18,000 lbs.

Maximum Frame Height
42"
 
The load carrying capacity of any truck is determined by the GVWR of the truck cab/chassis. It is important that you determine your truck has satisfactory carrying capacity and axle ratings for your specific application. Worldwide's authorized sales representatives are available to assist you in this regard. Specifications shown are subject to change without prior notification and some equipment shown may be optional. Please consult your factory authorized Jerr-Dan distributor to verify equipment specifications.

The tow rating of your recovery equipment is limited to the actual GVWR (Gross Vehicle Weight Rating) of your recovery vehicle, or the capacity of the equipment being used. For example, the GVWR of your recovery vehicle should not be exceeded by the GCW (Gross Combined Weight) of both towing and towed vehicles. This is the actual weight of the towing vehicle plus the towed vehicle(s) including: payload, driver, passenger(s) and fuel. (Everything that moves with your recovery vehicle.) However, if the towed vehicle has independent braking activated from the towing vehicle, the combined weight towed, will be the weight of the towing vehicle plus the lifted weight of the towed vehicle, which combined should not exceed the GVWR or the GAWR of the rear axle of the towing vehicle, or the capacity of the equipment used.